Call now on 01495 292 415
Units C & D, Roseheyworth Business Park, Abertillery, Gwent, NP13 1SX

Double Pillar Palletainer Tipper

Double Pillar Palletainer Tipper Description

BTM/1500/7310/B/G

This double pillar palletainer tipper is designed to lift and tip a 1500 Litre cardboard palletainer (1200 x 1000 x 1700mm High) at a discharge height of 7310mm. The double pillar palletainer tipper is constructed from Grade 304 stainless steel and is fully TIG welded throughout. Lifting with the double pillar palletainer tipper is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column. This double pillar palletainer tipper was designed to be bolted to the floor and braced near the top.

Safety Guard to PD 5304:2005 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section, 2mm stainless steel sheet and 20mm diameter stainless steel tube to meet the requirements of PD 5304:2005 Safety of Machinery. It encloses the double pillar palletainer tipper to a height of 6600mm on all sides with a hinged door through which the palletainer is loaded. The guard door is electrically and mechanically interlocked preventing the double pillar palletainer tipper from operating with the door open. In addition, the guard door can only be opened when the lifting carriage is at the full down position. The double pillar palletainer tipper control system has provision for a ‘Call for Product’ signal to be connected.

Double Pillar Palletainer Tipper Specification

DESCRIPTION DOUBLE PILLAR PALLETAINER TIPPER
MODEL No. BTM/1500/7310/B/G
CAPACITY 1500Kgs
TIPPING HEIGHT 7310mm
TIPPING ANGLE 130 DEGREES
OVERALL HEIGHT 9400mm
MACHINE HANDING LEFT OR RIGHT HAND AVAILABLE
TIPPING CHUTE OPTIONAL
CONTAINER DESCRIPTION PALLETAINER 1200 x 1000 x 1700mm
BASE ARRANGEMENT BOLTED TO THE FLOOR
CONTROL CIRCUIT 24Vac (STANDARD)
ELECTRICAL RATING IP65
LIMIT SWITCHES ADJUSTABLE ROD
MOTOR DETAIL 7.5kW, 415V, 3 PHASE, 50 CYCLE
MOTOR BRAKE 415V SEPARATELY EXCITED
GEARBOX DETAIL FLENDER
LOAD CHAIN 1" SIMPLEX SEDIS DELTA Z
LIFT SPEED ADJUSTABLE VIA AN INVERTER

Double Pillar Palletainer Tipper Application Story

This double pillar palletainer tipper was designed to load IQF Frozen Vegetables into vibratory feeder hoppers at a height of 7300mm at the start of a gravity fed multihead packing system for individual and mixed frozen vegetables. The cardboard palletainers weighing up to 1500 Kgs were loaded using pallet trucks and the tipping cycle was automated. The double pillar palletainer tipper lifted to an intermediate limit switch where it would stop and the tipper control would transfer to a remote push button station mounted at the upper level. The operator would then control the rate of discharge from the palletainer via ‘dead man’s handle’ control. Once the whole palletainer was discharged, the operator would send the empty palletainer back down where it could be removed and replaced.

Download CAD Image