Call now on 01495 292 415
Units C & D, Roseheyworth Business Park, Abertillery, Gwent, NP13 1SX

Single Pillar Lift for 200 Litre Tote Bins

Single Pillar Lift Description

BTM/250/2030/B/G

This single pillar lift for 200 Litre tote bins is designed to lift and tip at a discharge height of 2030mm. The single pillar lift is constructed from Grade 304 stainless steel and is fully TIG welded throughout. Lifting with the single pillar lift is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column. This single pillar lift is designed to be bolted to the floor.

Safety Guard to PD 5304:2005 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2mm stainless steel sheet to meet the requirements of PD 5304:2005 Safety of Machinery. It encloses the single pillar lift to a height of 2200mm on two sides, 1700mm at the front, with a hinged door on the fourth side. The guard door is electrically and mechanically interlocked preventing the single pillar lift from operating with the door open. In addition, the guard door can only be opened when the lifting carriage is at the full down position. The single pillar lift control system has provision for a ‘Call for Product’ signal to be connected.

Single Pillar Lift Specification

DESCRIPTION SINGLE PILLAR LIFT
MODEL No. BTM/250/2030/B/G
CAPACITY 250Kgs
TIPPING HEIGHT 2030mm
TIPPING ANGLE 130 DEGREES
OVERALL HEIGHT 3000mm
MACHINE HANDING LEFT OR RIGHT HAND AVAILABLE
TIPPING CHUTE OPTIONAL
CONTAINER DESCRIPTION STANDARD 200 LITRE TOTE BIN
BASE ARRANGEMENT BOLTED TO THE FLOOR
CONTROL CIRCUIT 24Vac (STANDARD)
ELECTRICAL RATING IP65
LIMIT SWITCHES ADJUSTABLE ROD
MOTOR DETAIL 0.55kW, 415V, 3 PHASE, 50 CYCLE
MOTOR BRAKE 415V SEPARATELY EXCITED
GEARBOX DETAIL FLENDER D38 M1P4D7.5
OUTPUT R.P.M. 28 R.P.M.
RATIO 50:1
LOAD/TENSION CHAIN ¾” SIMPLEX DELTA Z
TENSILE STRENGTH 3000Kgs
LIFT SPEED 6.4 METERS/MINUTE

Single Pillar Lift Application Story

This single pillar lift machine is used to load an Easiweigh depositing system for a ready meals producer. The single pillar lift was loaded with a cooked chilled vegetable and tipped into the Easiweigh intermediate vibratory hopper. The amount of discharge was controlled by the Easiweigh control system via a call for product sensor to ensure that the vibratory hopper was not over loaded with product. Once the single pillar lift had reached full tip it returned automatically to the full down position and activated an audible alarm to prompt the operator to load another bin.

Download CAD Image