Call now on 01495 292 415
Units C & D, Roseheyworth Business Park, Abertillery, Gwent, NP13 1SX

Single Pillar Mixing Bowl Tipper for Hobart Mixing Bowls

Mixing Bowl Tipper Description

BTM/250/1525/M

The mixing bowl tipper is a single pillar tipper that is designed to lift and tip a Hobart Mixing Bowl at a discharge height of 1525mm. The mixing bowl tipper is constructed from Grade 304 stainless steel, is fully TIG welded throughout and will operate on a 'dead mans handle' principle. Lifting with the mixing bowl tipper is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column. The Hobart Mixing Bowl is wheeled into the lifting frame and is latched during the tipping operation. The mixing bowl tipper is designed to be mobile on two fixed and two swivel braked castors.

Mixing Bowl Tipper Specification

DESCRIPTION SINGLE PILLAR MIXING BOWL TIPPER
MODEL No. BTM/250/1525/M
CAPACITY 250Kgs
TIPPING HEIGHT 1525mm
TIPPING ANGLE 130 DEGREES
TIPPING ANGLE 130 DEGREES
OVERALL HEIGHT 2475mm
MACHINE HANDING LEFT OR RIGHT HAND AVAILABLE
TIPPING CHUTE OPTIONAL
CONTAINER DESCRIPTION HOBART TYPE MIXING BOWL OR SIMILAR
BASE ARRANGEMENT MOBILE ON CASTORS
CONTROL CIRCUIT 24Vac (STANDARD)
ELECTRICAL RATING IP65
LIMIT SWITCHES ADJUSTABLE ROD
MOTOR DETAIL 0.55kW, 415V, 3 PHASE, 50 CYCLE
MOTOR BRAKE 415V SEPARATELY EXCITED
GEARBOX DETAIL FLENDER D38 M1P4D7.5
OUTPUT R.P.M. 28 R.P.M.
RATIO 50:1
LOAD/TENSION CHAIN ¾” SIMPLEX DELTA Z
TENSILE STRENGTH 3000Kgs
LIFT SPEED 6.4 METERS/MINUTE

Mixing Bowl Tipper Application Story

This mixing bowl tipper was designed to lift and tip a small Hobart Mixing Bowl. The customer mixed a batter in the mixing bowl and then needed to discharge the batter into a Riggs Autopack Depositor Hopper.

Download CAD Image