Call now on 01495 292 415
Units C & D, Roseheyworth Business Park, Abertillery, Gwent, NP13 1SX

Platform Lift

Platform Lift Description

PLM/300/830/B/G

This platform lift is a single pillar machine with a Safe Working Load of 300 Kgs and a lift height of 830mm. The lifting platform is big enough to allow a standard tote bin to be loaded by being wheeled onto the lifting platform. At the upper level, there will be a landing plate to allow easy unloading. The platform lift is constructed from Grade 304 stainless steel and is bolted to the floor and braced at the upper level. Lifting with the platform lift is accomplished via a chain driven by a motor gearbox mounted at the top of the main column.

Safety Guard to PD 5304:2005 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 20mm diameter stainless steel tube to meet the requirements of PD 5304:2005 Safety of Machinery. It would enclose the platform lift to a height of 2360mm with a hinged door at each level through which the platform lift can be loaded and unloaded. Each door is electrically interlocked to prevent the platform lift being operated with a door open and in addition, the doors are mechanically locked closed whilst the machine is running. Each door may only be opened when the lifting carriage is at the appropriate level.

Platform Lift Specification

DESCRIPTION SINGLE PILLAR PLATFORM LIFT
MODEL No. PLM/300/830/B/G
CAPACITY 300Kgs
TIPPING HEIGHT 830mm
OVERALL HEIGHT 2620mm
MACHINE HANDING LEFT OR RIGHT HAND AVAILABLE
PLATFORM SIZE 800 x 800mm
CONTAINER DESCRIPTION STANDARD 200 LITRE TOTE BIN
BASE ARRANGEMENT BOLTED TO THE FLOOR
CONTROL CIRCUIT 24Vac (STANDARD)
ELECTRICAL RATING IP65
LIMIT SWITCHES ADJUSTABLE ROD
MOTOR DETAIL 0.55kW, 3 PHASE, 50 CYCLE, 415V
MOTOR BRAKE 415V SEPARATELY EXCITED
GEARBOX DETAIL FLENDER
LIFT CHAIN 3/4" SIMPLEX SEDIS DELTA ‘Z’
TENSION CHAIN 3/4" SIMPLEX SEDIS DELTA ‘Z’
LIFT SPEED 6.4 METERS/MINUTE

Platform Lift Application Story

This platform lift was required to elevate a standard 200 litre tote bin from a ground floor level onto a mezzanine floor at a height of only 830mm. This particular platform lift had a ‘Z’ loading configuration so that the tote bin was loaded at the front and unloaded at the back of the platform lift at the upper level. This platform lift can be mounted on an existing floor and therefore does not require a pit to be created with the requisite drainage issues.

Download CAD Image