Call now on 01495 292 415
Units C & D, Roseheyworth Business Park, Abertillery, Gwent, NP13 1SX

Pallet Lift

Pallet Lift Description

PLM/1000/2530/B/G

This pallet lift is a double pillar machine with a Safe Working Load of 1000 Kgs and a lift height of 2530mm. The lifting platform will be big enough to allow a standard pallet (1200 x 1000mm) to be loaded using a hand pallet truck. At the upper level, there will be a landing plate to allow easy unloading. The pallet lift is constructed from Grade 304 stainless steel and would be bolted to the floor. Lifting with this pallet lift is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column.

Safety Guard to PD 5304:2005 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 3mm wire, 40mm aperture stainless steel weld mesh meet the requirements of PD 5304:2005 Safety of Machinery. It would enclose the pallet lift to a height of 4730mm with a hinged door at each level through which the pallets can be loaded and unloaded. Each door is electrically interlocked to prevent the pallet lift being operated with a door open and in addition, the doors are mechanically locked closed whilst the pallet lift is running. Each door may only be opened when the lifting carriage is at the appropriate level.

Pallet Lift Specification

DESCRIPTION DOUBLE PILLAR PALLET LIFT
MODEL No. PLM/1000/2530/B/G
CAPACITY 1000Kgs
TIPPING HEIGHT 2530mm
OVERALL HEIGHT 4730mm
MACHINE HANDING LEFT OR RIGHT HAND AVAILABLE
PLATFORM SIZE 1300 x 1100mm
CONTAINER DESCRIPTION STANDARD PALLET 1200 x 1000mm
BASE ARRANGEMENT BOLTED TO THE FLOOR
CONTROL CIRCUIT 24Vac (STANDARD)
ELECTRICAL RATING IP65
LIMIT SWITCHES ADJUSTABLE ROD
MOTOR DETAIL 2.2kW, 3 PHASE, 50 CYCLE, 415V
MOTOR BRAKE 415V SEPARATELY EXCITED
GEARBOX DETAIL FLENDER
LIFT CHAIN 1" SIMPLEX SEDIS DELTA ‘Z’
TENSION CHAIN 3/4" SIMPLEX SEDIS DELTA ‘Z’
LIFT SPEED 6.4 METERS/MINUTE

Pallet Lift Application Story

This pallet lift was required to elevate a standard pallet (1200 x 1000mm) from a ground floor level onto a mezzanine floor at a height of 2530mm. This particular pallet lift had a ‘Z’ loading configuration so that the pallet was loaded at the front and unloaded at the back of the machine at the upper level. This pallet lift can be mounted on an existing floor and therefore does not require a pit to be created with the requisite drainage issues.

Download CAD Image