Call now on 01495 292 415
Units C & D, Roseheyworth Business Park, Abertillery, Gwent, NP13 1SX

Guarded Bin Tipper for 600 Litre Dolaf Bins

Guarded Bin Tipper Description

BTH/600/1000/B/G

This guarded bin tipper is designed to lift and tip a 600 Litre Dolaf bin at a height of 1000mm. The guarded bin tipper is constructed from Grade 304 stainless steel and is a fully TIG welded construction throughout. This guarded bin tipper would be powered via a hydraulic powerpack and would tip the containers by the extension of a pair of stainless steel hydraulic cylinders. The guarded bin tipper will operate on a 'dead mans handle' principle and is designed to be bolted to the floor. The hydraulic cylinders will be fitted with hydraulic fuses to prevent the bin from falling in the unlikely event of a hose failure.

Safety Guard to PD 5304:2005 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 3mm wire, 40mm aperture stainless steel weld mesh to meet the requirements of PD 5304:2005 Safety of Machinery. It would enclose the guarded bin tipper to a height of 2200mm on two sides, 800mm at the front with a hinged door on the fourth side. The guard door is electrically and mechanically interlocked preventing the guarded bin tipper from operating with the door open. In addition, the guard door can only be opened when the lifting carriage is at the full down position.

Guarded Bin Tipper Specification

DESCRIPTION HYDRAULIC GUARDED BIN TIPPER
MODEL No. BTH/600/1000/B/G
CAPACITY 600Kgs
TIPPING HEIGHT 1000mm
TIPPING ANGLE 120 DEGREES
MACHINE HANDING LEFT OR RIGHT HAND AVAILABLE
TIPPING CHUTE OPTIONAL
CONTAINER DESCRIPTION 600 LITRE DOLAF BIN
BASE ARRANGEMENT BOLTED TO THE FLOOR
CONTROL CIRCUIT 24Vac (STANDARD)
ELECTRICAL RATING IP65
POWERPACK 415V, 50 Hz, 3 PHASE & NEUTRAL

Guarded Bin Tipper Application Story

This fully guarded bin tipper was loaded with a Dolaf bin via a hand pallet truck and tipped the contents of the bin onto a sorting table. The tipping operation was fully automated such that a bin could be loaded, the safety gate closed and a cycle ‘Start’ push button pressed. The guarded bin tipper then lifted to full up, paused to allow the entire product to exit and then returned to the full down position.

Download CAD Image