Call now on 01495 292 415
Units C & D, Roseheyworth Business Park, Abertillery, Gwent, NP13 1SX

Trolley Lift

Trolley Lift Description

PLM/300/4100/B/G

This Trolley Lift is a single pillar machine with a Safe Working Load of 300 Kgs and a lift height of 4100mm. The lifting platform is 750 x 1080mm to allow a standard tote bin or a mobile trolley to be loaded by being wheeled onto the lifting platform. At the upper level, there was a landing plate to allow easy unloading. The Trolley Lift is constructed from Grade 304 stainless steel and is bolted to the floor and braced at the upper level. Lifting with the Trolley Lift is accomplished via a chain driven by a motor gearbox mounted at the top of the main column.

Safety Guard to PD 5304 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2mm stainless steel sheet to meet the requirements of PD 5304 Safety of Machinery. It would enclose the Trolley Lift to a height of 6300mm with a hinged door at each level through which the tote bins can be loaded and unloaded. Each door is electrically interlocked to prevent the Trolley Lift being operated with a door open and in addition, the doors are mechanically locked closed whilst the Trolley Lift is running. Each door may only be opened when the lifting carriage is at the appropriate level.

Trolley Lift Specification

DESCRIPTION SINGLE PILLAR TROLLEY LIFT
MODEL No. PLM/300/4100/B/G
CAPACITY 300Kgs
LIFT HEIGHT 4100mm
OVERALL HEIGHT 6565mm
MACHINE HANDING LEFT OR RIGHT HAND AVAILABLE
PLATFORM SIZE 750 x 1080mm
CONTAINER DESCRIPTION STANDARD 200 LITRE TOTE BIN OR A MOBILE TROLLEY 840 x 610 x 1800mm HIGH
BASE ARRANGEMENT BOLTED TO THE FLOOR
CONTROL CIRCUIT 24Vac (STANDARD)
ELECTRICAL RATING IP65
LIMIT SWITCHES ADJUSTABLE ROD
MOTOR DETAIL 0.75kW, 415V, 3 PHASE, 50 CYCLE
MOTOR BRAKE 415V SEPARATELY EXCITED
GEARBOX DETAIL SEW
OUTPUT R.P.M. 28 R.P.M.
RATIO 50:1
LIFT CHAIN ¾” DUPLEX SEDIS DELTA Z
TENSILE STRENGTH 6000Kgs
RETURN CHAIN ¾” SIMPLEX
LIFT SPEED 6.4 METERS/MINUTE

Trolley Lift Application Story

This Trolley Lift was required to elevate a Trolley of Pasta Trays from a ground floor level onto a mezzanine floor at a height of 4100mm. This particular Trolley Lift had a ‘Z’ loading configuration so that the Trolley was loaded at the front and unloaded at the back of the Trolley Lift at the upper level. This Trolley Lift can be mounted on an existing floor and therefore does not require a pit to be created with the requisite drainage issues.

Download CAD Image