Call now on 01495 292 415
Units C & D, Roseheyworth Business Park, Abertillery, Gwent, NP13 1SX

Pallet Tipper

Pallet Tipper Description

BTM2P/1000/3200/B/G

This Pallet Tipper is designed to lift and tip 1000Kgs cardboard tote (1240 High x 1130 x 1130mm) at a discharge height of ¬3200mm. The Pallet Tipper is constructed from Grade 304 stainless steel and is fully TIG welded throughout. Lifting with the Pallet Tipper is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column. This Pallet Tipper is designed to be bolted to the floor.

Safety Guard to PD 5304 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 3mm wire, 40mm aperture stainless steel weld mesh to meet the requirements of PD 5304 Safety of Machinery. It would enclose the Pallet Tipper to a height of 2200mm on three sides with a hinged door on the fourth side. The guard door is electrically and mechanically interlocked preventing the Pallet Tipper from operating with the door open. In addition, the guard door can only be opened when the lifting carriage is at the full down position. The Pallet Tipper control system has provision for a ‘Call for Product’ signal to be connected.

Pallet Tipper Specification

DESCRIPTION DOUBLE PILLAR PALLET TIPPER
MODEL No. BTM2P/1000/3200/B/G
CAPACITY 1000Kgs
TIPPING HEIGHT 3200mm
TIPPING ANGLE 130 DEGREES
OVERALL HEIGHT 5250mm
MACHINE HANDING LEFT OR RIGHT HAND AVAILABLE
TIPPING CHUTE OPTIONAL
CONTAINER DESCRIPTION CARDBOARD TOTE (1240 x 1130 x 1130mm)
BASE ARRANGEMENT BOLTED TO THE FLOOR
CONTROL CIRCUIT 24Vac (STANDARD)
ELECTRICAL RATING IP65
LIMIT SWITCHES ADJUSTABLE ROD
MOTOR DETAIL 2.2kW, 380V, 3 PHASE, 50 CYCLE
MOTOR BRAKE 380V SEPARATELY EXCITED
GEARBOX DETAIL SIEMENS
LIFT CHAIN 1" SIMPLEX SEDIS DELTA ‘Z’
TENSILE STRENGTH 6000Kgs
TENSION CHAIN 1” SIMPLEX SEDIS DELTA Z
TENSILE STRENGTH 6000Kgs
LIFT SPEED 6.4 METERS/MINUTE

Pallet Tipper Application Story

This Pallet Tipper was required to lift and tip a 1000 Kgs Cardboard Tote of snack pellets into a silo at a height of 3200mm.

Download CAD Image