Double Pillar Box Tipper
BTM/2P/500/2925/B
Double Pillar Box Tipper Description
This double pillar box tipper was designed to lift and tip a 600 Litre container (1200mm x 1000mm x 750mm High) at a discharge height of 2925mm. The double pillar box tipper was constructed from Grade 304 stainless steel and is fully TIG welded throughout. Lifting with the double pillar box tipper is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column. This double pillar box tipper is designed to be bolted to the floor.
Double Pillar Box Tipper Specification
|
DESCRIPTION
|
DOUBLE PILLAR BOX TIPPER
|
|
MODEL No.
|
BTM/2P/500/2925/B
|
|
CAPACITY
|
500Kgs
|
|
TIPPING HEIGHT
|
2925mm
|
|
TIPPING ANGLE
|
180 DEGREES
|
|
OVERALL HEIGHT
|
4675mm
|
|
MACHINE HANDING
|
LEFT OR RIGHT HAND AVAILABLE
|
|
TIPPING CHUTE
|
OPTIONAL
|
|
CONTAINER DESCRIPTION
|
600 LITRE CONTAINER
|
|
BASE ARRANGEMENT
|
BOLTED TO THE FLOOR
|
|
CONTROL CIRCUIT
|
24Vac (STANDARD)
|
|
ELECTRICAL RATING
|
IP65
|
|
LIMIT SWITCHES
|
ADJUSTABLE ROD
|
|
MOTOR DETAIL
|
0.75Kw, 3 PHASE, 50 CYCLE, 415V
|
|
MOTOR BRAKE
|
415V SEPARATELY EXCITED
|
|
GEARBOX DETAIL
|
SIEMENS
|
|
LOAD CHAIN
|
1" SIMPLEX SEDIS DELTA Z
|
|
TENSION CHAIN
|
¾” SIMPLEX DELTA Z
|
|
LIFT SPEED
|
6.4 METERS/MINUTE
|
Double Pillar Box Tipper Application Story
This double pillar box tipper was required to lift and tip a box containing bean sprouts into a vibratory feeder hopper. To ensure that the bean sprouts were discharged in the tipped position, the bin was completely inverted through 180 degrees. To do this the box tipper lift carriage tips the bin to an initial angle of 130 degrees at which time the lift carriage inner frame gently falls forward to achieve the final tip angle of 180 degrees. The rate at which the final 50 degrees of tip is achieved is adjustable via a hydraulic cylinder with flow control valves. The end of travel position at full up and full down on this cylinder is cushioned.
|